| specifications and models | HW-FZ100(Double groove + elastic height + double lift) |
|---|---|
| Motor power | 6520W/380V/50HZ |
| Holding plate thickness range | 4-100mm |
| Machining groove Angle | 0-75 degrees (adjustable) |
| Machining groove speed | 0-1100 RPM (variable frequency) |
| Cutter cutting speed | 0-1100 RPM (variable frequency) |
| groove type | K/VIX[Y groove + upper groove + lower groove + side 0 degree modified groove |
| Wide beveling surface | The single groove is 20mm, and the width of the bevel can reach 70mm with multiple knives |
| Processed sheet size | Recommended above 280**4mm (the narrowest width of the strip can be 40mm) |
| Raise and lift system | Flexible floating lift + arbitrary height switch (free of ground and plate uneven restrictions) |
| Clamping pressure control | Automatic electric clamping + manual clamping double switch, clamping pressure 0-500N |
| Drive clamping assembly | 11 sets of drive wheels (top 6+ bottom 5) |
| Weight and shape | 420KG, 1TmxTmx1.5m |
| Processed material | Carbon steel stainless steel duplex steel alloy steel cast iron aluminum plate, etc |
| Bevel finish | Ra3.2-6.3 |
HW-FZ100 automatic milling machine
The milling bevel of this equipment is large, which is suitable for carbon steel, stainless and non-steel parts. For large plates with plate brackets, the equipment will automatically walk when milling, processing small plates will automatically walk, than the traditional gantry structure of the milling machine flexible operation, not limited by the size of the site and the plate, compared to low prices, low energy consumption, and follow -up maintenance is convenient, the workplace equipment is convenient and easy to move.
Reviews
There are no reviews yet.